vasp需要什么系统?

11 # feedback is greatly appreciated

vasp一般用的都18 # - ifc.10.1 partially recommended (both for 32 and 64 bit)是linux,另外也会有windows,当然你也可以用北鲲云超算来运行,不需要安装到本地,软件都是预装好直接可用,为了加快计算效率,大部分人都会选择云超算来跑作业,可以节省大量计算时间。

vasp安装 vasp安装包vasp安装 vasp安装包


vasp安装 vasp安装包


编译vasp出现错误,求帮助,如能帮助,不胜感激

mpif90: error while loading shared libraries: libimf.so: cannot open shared object file: No such file or di25 # Version 12.1.5.339 Build 20120612rectory

安装环境centOS6.5+In parallel studio xe 2013+openmpi+fftw

mpif90 -FR -names lowercase -assume byterecl -O2 -ip -I/opt/in/comer_xe_2013.2.146/mkl/include/fftw -c base.f90

这是我的修改过的makefile:

1 .SUFFIXES: .inc .f .f90 .F

2 #-----------------------------------------------------------------------

3 # Makefile for In Fortran compiler for Pentium/Athlon/Opteron

4 # based s

7 # howr mandatory (whereas they are optional for In platforms)

8 # For Athlon we recommend

9 # ) to link against libgoto (and mkl as a backup for missing routines)

10 # ) odd enough link in libfftw3xf_in.a (fftw intece for mkl)

12 #

13 # The makefile was tested only under Linux on In and AMD platforms

14 # the following compiler versions he been tested:

15 # - ifc.7.1 works stable somewhat slow but reliably

17 # - ifc.9.1 recommended (both for 32 and 64 bit)

19 # tested build 20080312 Package ID: l_fc_p_10.1.015

21 # using ifc.10.1

22 # - ifc.11.1 partially recommended (some problems with Gamma only and in fftw)

23 # Build 20090630 Package ID: l_cprof_p_11.1.046

24 # - ifort.12.1 strongly recommended (we use this to compile vasp)

27 # it might be required to change some of li

你的makefile没有贴全。

phonopy 怎么看一个声子模式的实空间位移

这是修改过makefile后make出现的错误:

刘仕晨(站内联系TA)vasp能直接计算声谱至少我知道啦 我经费所用免费phonopy接口vasp计算摸索知道其神没或者用pwscf计算声刘仕晨(站内联系TA)集群装phonopy能点麻烦装前要装东西phonopy需要太资源装行用台式机或者笔记本装ubuntulinux系统按照官提示步步作行安装些软件载些前准备软件都安装再安装phonopyidentation(站内联系TA)装phonopy麻烦像需要root权限 装phonopy参照phonopy站即两种模式种限种线性响应google搜索phonopyphonopy站找VASP+phonopy按说明做即 算gamma点vaspIBRION改6或者8行搜IBRION选项future_wl(站内联系TA)我用vasp+phonon算pho11 # feedback is greatly appreciatednon收

VASP只能在linux系统

fpp -f_com=no -free -w0 base.F base.f90 -DMPI -DHOST="LinuxIFC" -DIFC -DCACHE_SIZE=4000 -DPGF90 -Doidalloc -DNGZhalf -DMPI_BLOCK=8000 -Duse_collective -DscaLAPACK -DRPROMU_DGEMV -DRACCMU_DGEMV

一般用的都是linux,另外也会有windows。

当然你也可以用北鲲云超算来运行,不需要安装到本地,软件都是预装好直接可用,为了加快计算效率,大部分人都会选择云超算来跑作业,可以节省大量make: Error 127计算时间。

HEBES应该怎么使用?

16 # - ifc.8.1 fails to compile the code properly

HEBES是一种常见的真菌杀菌剂,常用于防治植物病害。具体使用方法如下: 1. 按照品说明书上的使用浓度和使用方法,将HEBES溶解在水中。 2. 在使用HEBES之前,应该先将植物叶面上的灰尘和物擦拭干净,以免影响剂的吸收。 3. 将剂均匀喷洒在病菌部位,并在植物表面均匀喷洒,以充分覆盖受到感染的植物部位。 4. 注意剂的使用量和时间,避免超过规定使用量或剂过期。 5. 在使用剂后,应及时清洗喷洒器,避免剂残留,同时也需要注意自身的防护,避免吸入剂或接触剂。 总之,使用HEBES或其他剂时应先了解品的使用方法和安全注意事项,并按照使用规定进行作。在喷洒剂的过程中,保护好自己的健康,并确保剂能够充分覆盖病菌部位,发挥的防治效果。

5 # we recommend this makefile for both In as well as AMD s

HEBES应该怎么使用?

20 # the gamma only mpi version can not be compiles

HEBES是make: Error 127一种常见的真菌杀菌剂,常用于防治植物病害。具体使用方法如下: 1. 按照品说明书上的使用浓度和使用方法,将HEBES溶解在水中。 2. 在使用HEBES之前,应该先将植物叶面上的灰尘和物擦拭干净,以免影响剂的吸收。 3. 将剂均匀喷洒在病菌部位,并在植物表面均匀喷洒,以充分覆盖受到感染的植物部位。 4. 注意剂的使用量和时间,避免超过规定使用量或剂过期。 5. 在使用剂后,应及时清洗喷洒器,避免剂残留,同时也需要注意自身的防护,避免吸入剂或接触剂。 总之,使用HEBES或其他剂时应先了解品的使用方法和安全注意事项,并按照使用规定进行作。在喷洒剂的过程中,保护好自己的健康,并确保剂能够充分覆盖病菌部位,发挥的防治效果。

编译vasp出现错误,求帮助,如能帮助,不胜感激

6 # for AMD based s appropriate BLAS (libgoto) and fftw libraries are

安装环境centOS6.5+In parallel studio xe 2013+openmpi+fftw

mpif90 -FR -names lowercase -assume byterecl -O2 -ip -I/opt/in/comer_xe_2013.2.146/mkl/include/fftw -c base.f90

这是我的修改过的makefile:

1 .SUFFIXES: .inc .f .f90 .F

2 #-----------------------------------------------------------------------

3 # Makefile for In Fortran compiler for Pentium/Athlon/Opteron

4 # based s

7 # howr mandatory (whereas they are optional for In platforms)

8 # For Athlon 26 #we recommend

9 # ) to link against libgoto (and mkl as a backup for missing routines)

10 # ) odd enough link in libfftw3xf_in.a (fftw intece for mkl)

12 #

13 # The makefile was tested only under Linux on In and AMD platforms

14 # the following compiler versions he been tested:

15 # - ifc.7.1 works stable somewhat slow but reliably

17 # - ifc.9.1 recommended (both for 32 and 64 bit)

19 # tested build 20080312 Package ID: l_fc_p_10.1.015

21 # using ifc.10.1

22 # - ifc.11.1 partially recommended (some problems with Gamma only and in fftw)

23 # Build 20090630 Package ID: l_cprof_p_11.1.046

24 # - ifort.12.1 strongly recommended (we use this to compile vasp)

27 # it might be required to change some of li

你的makefile没有贴全。