固定式登车桥哪家好？

一下济南天峰吧，这个地方很不错，当时我们单位采购了一台移动登车桥，很快就生产好了，并且一直用的很好。产品也比较美观，通过这次合作感觉这个厂家的服务很不错。

登车桥标准尺寸(登车桥图纸)登车桥标准尺寸(登车桥图纸)


登车桥标准尺寸(登车桥图纸)


登车桥标准尺寸(登车桥图纸)


苏州卡特凯拓机械设备有限公司生产的移动式登车桥台面采用特制的菱形网格板有可靠的强度，能保证长期使用而不变形。它的菱形网状结构，充分保证了卓越的防滑性能，使叉车有更好的爬坡性和可纵性。即使在雨、雪天气，仍能保证正常使用。采用手摇液压泵作动力，勿需外接动力电源即可轻松实现高度调节

苏州市索沃斯液压升降机械有限公司，是集专业及开发于一体的制造商，公司生产设备先进，技术力量雄厚，工艺流程先进合理，严格按照标准，检测手段齐全。产品设计新颖，升降平稳，作安全。

济南龙铸液压机械有限公司生产的固定登车桥质量好，常规产品都有现货，出货快，我们之前从他那购买过一批，确实是专业的厂家并且售后服务好，前一段时间出保了一次服务态度很满意，确实是值得信赖，值得给您。

济南金川液压机械有限公司生产的固定式登车桥不错，金川公司是专业设计制造非标准固定式液压登车桥的厂家，您可以咨询下。

货梯升降平台稳绳怎样安装

升降货梯需要挖一个地坑，这个地坑需要客户根据我们提供的图纸，找施工队完成。地坑是用于放置导轨式升降货梯的，保证设备落下后，台面与地面保持水平。一定要保证地坑的尺寸和垂直度，否则会影响平台的安装

用钢丝绳拴住升降平台底座上的吊钩，起吊至预定位置，平稳放置后松开吊绳。升降平台放入地坑后，需要安装人员进入地坑进行位置调整和接线工作。由于地坑空间较小，安装人员无法进入，此时需要把升降平台的台面吊起，使安装人员可以进入地坑内工作。一定要做好防护，注意安全；

货梯升降平台稳绳怎样安装，钩你当中,将货梯起吊到预定的位置待其位置平稳后松开吊绳,如果工作(job)人员需要进入地坑进行位置调整的 话,也可以先将升降货梯的 台面吊起来,腾出足够的空间让进

跪求英语大神帮忙翻译一下这段文 感激不尽！！！！！！！

Important rmation:

1. The embedded PVC pipe requirements: 2 inches of embedded PVC pipe directly to the controller (2) the external power supply leads to 2.5 square line conductor / 5 for 380 v voltage, which leads to the length of about 300 mm3. Conditional equipped with an independent air switch a. embedded 2 inch PVC pipes, which leads to the 2.5 square line / 4 core, which leads to the length of about 500 MM b. cargo ideal height 1200-1400 non-standard Angle: 70 14 MM rebar welding structure of Y type steel (performed by civil parties) cement finish suce cannot exceed Angle iron suce c. package edge Angle sample figure to bottom embedded network graph distance Angle steel sample d. and surrounding rerced concrete layer bottom not less than 300 MM thick 6 feet in size dock ller pit construction drawing tolerance range: + / - 5 0 MM units: A diagonal error is not more than 10 MM MM pit pit suce requirements at user ll reserved hole must be Fang Zhengping straight, diagonal dimension permissible error less than 10 MM. Size must be strictly in accordance with the supplier to provide installation hole size chart. The user must supply power to the cargoes in aance on the electric cabinet, electric cabinet height generally yzed the mesa of about 1200 mm. Operation should be considered at the same time can see the yard. Users must be on the edge of the pit ition in aance to prepare solid collision package edge Angle (see drawing), Angle iron size not less than 8 #, and must use the hook connected with civil engineering steel fabric in the solid, each distance not greater than 300 mm. Pit in front of a strong/flat on both sides, is used to install anti-collision rubber pad. Pit a backend is a little higher than the front (510 mm), oid water clean or rainy days. Users need to be embedded in accordance with local safety standards of dark current pipeline (buried under the concrete); Wire and tube diameter of about 30 mm 6 1.52 built-in power line, electric tube connected to control button box (included). Button box installed on the wall. Hydraulic unloading platform power supply: 380 v / 50 hz / 0.75 KW (220 v / 50 hz. 0.75 KW). Cllimbing trolley installation the relationship with the exterior wall is divided into inner wall and outer wall, row wiring pipe ition based on the specific situation, please. Concrete: civil engineering must be pouring concrete, concrete grade (common)

Important rmation: 1 pre buried PVC pipeline requirements: 2 inch embedded PVC pipe leads directly to the 2 external power supply controller leads to 2.5 square line /5 core for 380V voltage, leads to a length of about 300mm3. conditions with an independent air switch A. embedded in PVC 2 inch tube, leads to the 2.5 square line /4 core, led length about 500mm B. platform ideal height 1200-1400 non-standard angle: 70 14MM screw thread steel is welded on the structure of Y steel (by construction) cement finished suce can not exceed the angle iron C. wrapping angle pit is embedded network chart drawing steel rerced distance like figure D. bottom and surrounding rerced concrete layer thickness not less than 300mm within 6 feet of space size board bridge pit construction diagram of tolerance range: +5/-0MM unit: MM pit diagonal difference of 10MM suce pit pit request ll user reservation must be founder straight, diagonal dimension error less than 10mm. Size must be in strict conformity with the supplier to provide installation pit size chart. The user must supply power to the board the bridge of the electric control box, control box height from the platform suce about 1200mm is appropriate. At the same time should be considered when operation can see Deng Axle movement. Anticollision wrapping angle the user must aance in the pit edge to prepare stable (see drawing), angle size can not be less than 8#, and must use the inverted hook and civil steel net stable connection, each distance of not more than 300mm. Pit in front of both sides to strengthen / flat, used to install crash pad. Pit is a little higher than the front end (about 510mm), oid cleaning or rainy days the water. The user needs to pre buried in accordance with local safety standards of dark electrical conduit (buried under concrete); wire and tube diameter is about 30mm with built-in 61.52 power line, tube connected to the control button box (attached). Button box mounted on the wall. Hydraulic unloading platform power: 380v/50Hz/0.75KW (220v/50Hz.0.75KW). The relationship between board installation and external axle is divided into inner wall and outer wall type, please according to the specific situation of distribution line tube ition. Concrete: Civil around must be concrete, concrete grade: (ordinary ll)

Ann paul wesley

移动式登车桥的坡度多少

移动式登车桥坡度多少并不重要，重要的是我们设计的移动式登车桥符合客户的要求，能够帮助客户解决他们所面临的问题，我们的设计师是站在客户的角度考虑设计的，标准移动式登车桥是10°，15°，根据客户的具体情况，稍有不同，可以达到客户的使用要求。